Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
Gate repair in Henderson usually starts with a phone call about a gate that’s dragging, or an operator that stopped responding after the last wind event. We work on both: the ornamental iron and aluminum driveway gates that define Green Valley and Anthem streetscapes, and the automatic operators behind shared community entries. Our technicians have up to 12 years of experience and know this east-side market, where HOA architectural rules and desert soil shape nearly every repair. Call (866) 983-9213 and a live person answers, any hour. You’ll get a written price before any work begins.
Why Vance Gate Repair Winchester Is Henderson’s Preferred Gate Repair Company
Henderson homeowners tend to call us after they’ve already read the other reviews and gotten a verbal estimate that felt vague. We price in writing, hand it over before anyone picks up a tool, and leave a photo record of what we found and what we changed. In a valley where wind and 110°F summers wear operators and finish coatings faster than most places, that documentation matters. It means the next technician doesn’t have to re-diagnose what we already set.
Under The Haven Standard, every Henderson job carries the 365-Day Done Right Promise: if the repair isn’t right inside a full year, we make it right at no additional charge. We service nine automation brands and repair what’s on the property rather than steering you toward a replacement. And when another company’s written estimate leaves you unsure, we’ll review it free. Background-checked, uniformed technicians arrive with a name and photo sent ahead. Live person answers 24/7 – no voicemail loop.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson

Hinge & Post Repair
This is the most common repair we do in Henderson, and the desert is the reason. Caliche-hard soil and shifting ground can skew a hinge post until the gate sags and drags, so we check the footing first, not just the hinge. If the post has moved, a concrete footing repair prevents a repeat failure. In Anthem and Seven Hills, the replacement hardware and finish have to match the community’s approved iron style, and we document the part numbers installed.

Gate Realignment
Wind storms routinely bend lightweight aluminum gates or push them out of square, so the gate binds or won’t latch cleanly. Realignment restores travel and latch geometry. Before we reset anything, we note the community’s architectural spec so the gate swings true and still matches its approved height and look. You get a photo log of every adjustment.

Automatic Gate Repair
Extreme heat and blowing dust degrade operator components, and safety photocells and keypad entry systems are the usual fault points on the east side. We service Ghost Controls, DoorKing, Elite, Mighty Mule and five other brands, so we work on the operator already on your property. A typical swing-gate motor replacement runs between $650 and $1,400 depending on the brand and whether the arm bracket is intact.

Electric Gate Repair
When an electric driveway or shared entry gate stops opening, the cause is often a control-board fault, a wiring connection, or a misaligned photo-eye rather than the motor itself. We trace the circuit and document the readings. For shared HOA entries, we coordinate with the management company so residents aren’t locked out longer than necessary.
Before
AfterTrusted Brands We Service in Henderson
We work on whatever automation is already on your gate: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That means a Ghost Controls arm on a Green Valley driveway gate or a DoorKing system at a shared Anthem entry gets diagnosed by someone who knows the part, not a company that only handles one brand. We don’t keep a local parts inventory, so expect a measured, scheduled turnaround on ordered parts; emergency faults we tackle the same day.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes

- Wind-bent aluminum and misaligned hinges. Exposed communities like Anthem take the brunt of valley wind, and lightweight gates bend or twist, throwing the hinges out of line. The result is a gate that scrapes the ground or won’t latch.
- Heat and dust fouling operator components. Summer heat and grit wear safety photocells and keypad entry systems faster here than in milder markets, so faults recur until the component is replaced or reset.
- Skewed hinge posts from caliche and shifting ground. Caliche-hard soil and settling desert ground push posts out of plumb, which is why a gate sags even after new hinges. The footing, not the hinge, is often the real culprit.
- Sun-baked finish and rust on ornamental metal. Years of intense UV and dust break down coatings on iron and aluminum gates, and rust takes hold at welds and joints. Early weld and rust repair keeps a small failure from becoming a replacement.
Pricing for Gate Repair in Henderson, NV
Here’s what gate work actually runs in Henderson’s market. Hinge and post repair typically runs $250 – $650, with footing repair adding to the upper end. Gate realignment is usually $150 – $350. Safety photocell or keypad replacement commonly falls between $180 and $420. Automatic operator repair runs $200 – $550, and a full swing-gate motor replacement is $650 – $1,400 depending on brand and bracket condition. Weld and rust repair is priced per section once we see it. What moves the number: footing condition, brand and part availability, and whether the community’s approved finish has to be matched. Every price is quoted and agreed in writing before work starts – no invoice surprises. Estimates are free, and we’ll review another company’s written estimate at no cost.
We Also Serve Cities Near Henderson

Our Gate Repair team covers the neighborhoods around the valley too, including Boulder City, Whitney, Paradise and Enterprise. If you’re just outside our Henderson coverage and want to know whether your address qualifies, call and we’ll tell you straight rather than book a job we can’t serve well.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Henderson

It depends on your community’s CC&Rs and whether the work changes the gate’s appearance, color, height or iron style. In master-planned communities like Green Valley and Anthem, even a minor repair that alters the approved architectural spec may need board or management sign-off. A like-for-like repair usually doesn’t, but a replacement or a color change often does. We’ll tell you what we found and what matching the community’s spec involves, and we coordinate with the management company where needed. Call (866) 983-9213 for a quote.
Because the hinge post footing, not the hinge, is usually the real failure. Caliche-hard soil and shifting desert ground let the post skew out of plumb, so a freshly hung gate droops again once it’s loaded. The fix is to reset or repair the footing, then realign the gate to the post. Expect $250 – $650 for hinge and post work, footing repair included at the upper end. Call for an exact written price.
There’s no single best brand, but heat-rated operators with sealed control boards and metal housings hold up better through summers above 110°F than lightweight units. The right choice depends on your gate’s weight, width and swing, and on the brand already on the property. We service Ghost Controls, DoorKing, Elite, Mighty Mule and five others, so we match the operator to your gate rather than pushing a replacement. Call us to schedule a measure and a written price.
Twice a year is a reasonable baseline, and more often in dust-heavy months. Photocells – the infrared beams that stop the gate if something crosses the path – misalign from heat and grit, which is a common fault across Henderson’s east side. A misaligned beam can make a gate reverse or refuse to close. Photocell and keypad replacement typically runs $180 – $420. Call (866) 983-9213 to book a check.
A grinding noise usually points to a worn gear, a failing operator arm, or a hinge binding against a misaligned post. Left alone, a grinding gear can strip and take the whole operator with it. The usual fix is operator component repair at $200 – $550, though a binding hinge sometimes needs realignment instead. We trace the source and photograph what we set before we leave. Call for a written quote.
Gate problems in Henderson tend to get worse with every wind event and every hot month, and a small footing issue can turn into a replacement if it’s left. Call (866) 983-9213 for a free estimate. You’ll get a written price before any work starts, a documented photo record when we leave, and a live person on the phone any hour of the day.
Written by the team at Vance Gate Repair Winchester.