A Vance company - serving Winchester, NV
Gate Repair in Enterprise, NV | Vance Gate Repair Winchester

Gate Repair in Enterprise - On-Site in 60 Minutes, Fixed the Same Day

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Repair Across Enterprise

If your driveway gate is dragging, reversing mid-travel, or dead in the water, the fix usually starts with the operator and the posts it was hung on, not with the panel itself. Enterprise sits in the 1990s – 2000s master-planned build zone south of Las Vegas, and most of the gates we’re called to in 89139 are builder-grade equipment never quite matched to the steel it’s moving. Our technicians have up to 12 years of experience, we answer the phone around the clock, and we hand you a written price before anyone picks up a tool. Call (866) 983-9213.

Call (866) 983-9213

Key takeaways

  • Most Enterprise gate calls trace to two things: an operator sized for a lighter panel, and power or conduit that was never run at build time.
  • We check the hinge post before the panel, because a sagging gate usually fails at the footing.
  • Every visit ends with a written scope, a written price, and a photo record of what we found and what we set.
  • HOA design review comes before the work in most Enterprise communities, and we plan for it.

Why Vance Gate Repair Winchester Is Enterprise’s Preferred Gate Repair Company

Enterprise homeowners tend to do their homework before they call anyone. Fair enough. What we can show you is the paperwork: 22,000+ gates repaired and installed across the region, every one with a written price before the job started and a photo record left behind when the technician walked off the property. That record includes the part numbers installed, the limit-switch readings before and after, and the wiring as we found it. Under the Haven Standard, that documentation comes with every visit at no extra charge, and the 365-Day Done Right Promise covers the repair for a full year. If it isn’t right, we make it right – no argument, no fee.

We work on nine automation brands, so we’re not going to steer you toward a replacement because your motor happens to be a FAAC or an Elite instead of the make we’d have picked. And a live person answers the phone every hour of every day. No voicemail loop, no callback queue. If you bring us a written estimate from another company, we’ll review it free of charge and tell you plainly whether the scope matches the problem.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Repair Services in Enterprise

professional gate repair service
Our Gate Repair Services in Enterprise

Automatic Gate Repair

Our Gate Repair team handles automatic gate failures in Enterprise more than any other call, and the pattern is consistent: an operator that was rated for a lighter panel straining against ornamental steel, then stalling or reversing when the July heat pushes past 105°F. We test the motor under load, read the limit switches, check the board and the battery backup, and tell you whether the unit can be corrected or needs to be matched properly to the gate’s actual weight. Either way, you get the diagnosis in writing.

Automatic Gate Repair

Hinge & Post Repair

Enterprise sits on caliche-heavy soil that makes footings hard to dig and just as hard to keep still, so hinge posts drift and the gate sags long before the panel shows any wear. We check for post movement first, then correct the footing or reset the post before we touch a single hinge. Doing it in the other order is how homeowners end up paying twice to rediscover the same problem.

Hinge & Post Repair

Gate Realignment

Realignment is the quiet repair. A gate that drags on the ground or catches the strike post is usually out of plumb by a degree or two, often because the post shifted rather than because anything bent. We photograph the plumb reading, adjust the hinges or the post, and record the new position so the next technician isn’t guessing. Most realignment work in Enterprise runs $150 – $320.

Gate Realignment

Electric Gate Repair and Access Control

Electric gates in Enterprise often inherit wiring that was never planned for. When a manual gate gets motorized later, the power run and the conduit for loop detectors or a keypad frequently don’t exist, and what’s left is exposed cable stapled along a block wall. We sort out the low-voltage side, test the entrapment protection, and document the wiring so the circuit is legible to anyone who opens the control box after us.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 983-9213

BeforeBefore
AfterAfter

Trusted Brands We Service in Enterprise

We work on LiftMaster, FAAC, Elite, Mighty Mule, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule’s residential line – whichever motor is already on your property. We don’t stock parts locally or claim to; what we do is identify the exact model and vintage, then source the correct arm, board, or limit assembly for it. That’s usually faster than starting over with a new operator, and it’s almost always cheaper. If a board is genuinely obsolete, we’ll tell you that in writing too, along with what a matched replacement would cost.

Common Gate Repair Problems We See in Enterprise Homes

Professional welder performing gate hinge repair and metal fabrication services.
Common Gate Repair Problems We See in Enterprise Homes

The failures in Enterprise are mostly builder-grade, not age-related. These planned communities went up fast in the boom, and the gates went in with light residential operators and undersized hinge posts. So the conversation in 89139 usually starts with equipment that never matched the gate it was moving.

  • Operators undersized for the panel. A motor rated for a lighter gate, bolted to a wrought-iron or steel panel, strains every cycle. In summer heat that turns into stalling, mid-travel reversal, and premature motor failure.
  • Manual gates motorized without a power run. Plenty of Enterprise side-yard and driveway gates were hung manual and later fitted with an opener. Without a dedicated circuit or conduit, you get exposed wiring and no clean path for loop detectors or keypad entry.
  • Hinge posts drifting in caliche. The soil here resists excavation and shifts after it’s backfilled, so posts move and the gate sags even when the panel and hinges are fine.
  • Finish failure from UV and heat. Powder-coat and paint bake under the desert sun, and vinyl gates warp. A faded or chalked finish isn’t cosmetic in an HOA community – it’s a compliance issue.

A typical call in one of these communities starts with a builder-grade swing gate that drags, reverses mid-travel, or stops short. A qualified local pro checks the hinge post for movement before touching the panel, tests entrapment protection under UL 325, and either corrects the footing and re-hangs the gate or specs an operator matched to the panel’s weight and the run’s power reality.

Get the price in writing before anything starts.Serving Enterprise - a real person answers, day or night.
Call now

The Enterprise Detail That Changes the Job: HOA Approval and Finish Matching

Enterprise is master-planned suburbia built almost entirely during the 1990s – 2000s boom south of Las Vegas, and gate repair here is overwhelmingly HOA-governed residential work. Homeowners repairing or replacing a driveway or side-yard gate have to match community design standards, and in most of these communities that means HOA architectural approval before a single post is poured. The trade in 89139 is defined by that approval-and-matching dynamic, not by older housing stock.

Which is why the most common non-mechanical part of the job is matching an existing wrought-iron or powder-coat finish and gate profile exactly. A replacement can work perfectly and still get rejected by the design review because the scroll pattern is off by an inch or the powder-coat sheen doesn’t match the block-wall fence line. We photograph the existing finish and profile before we order anything, and we hand you that record to include with your submittal. Get that part wrong and you’re paying twice – once for the gate, once for the one the committee will actually accept.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Repair in Enterprise, NV

A professional repairing a cracked decorative metal gate post with epoxy
Pricing for Gate Repair in Enterprise, NV

Here’s what gate work actually runs in Enterprise, in dollars, so you’re not calling blind.

Job Typical Enterprise range
Hinge or post repair $180 – $420
Gate realignment $150 – $320
Automatic gate repair (board, arm, or limit switch) $220 – $650
Electric gate diagnosis and low-voltage wiring correction $250 – $700
Lock repair or replacement $120 – $280
Weld and rust repair on steel panels $200 – $550

What moves the number: whether the hinge post needs resetting in caliche, whether the operator can be corrected or has to be matched to a heavier panel, and whether a power or conduit run has to be added. The flat price is written and handed to you before any work starts – no “call for a quote,” no surprise invoice at the end. Estimates are free, and if you’ve got a written estimate from another company, we’ll review it at no cost.

We Also Serve Cities Near Enterprise

The same boom-era housing and the same caliche soil run out past the Enterprise line. We take gate repair calls in Spring Valley, Paradise, Winchester, and Henderson, and the builder-grade operator and missing-conduit problems don’t change much as you cross into them. If you’re outside Enterprise proper, mention your ZIP when you call and we’ll confirm coverage before we schedule anything.

Serving Enterprise, NV – Our Local Coverage Area

Two professional technicians installing a custom wrought iron driveway gate
Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Repair in Enterprise

Get a Written Price on Your Enterprise Gate Repair

professional gate installation service
Get a Written Price on Your Enterprise Gate Repair

Whether it’s a builder-grade operator that never matched the panel, a hinge post drifting in caliche, or a replacement gate that has to clear HOA design review, we’ll survey it, photograph what we find, and hand you a written scope and a flat price before any work begins. A live person answers around the clock, and our technicians have up to 12 years of experience on the brands that are already on your property. Call (866) 983-9213 for a free estimate on Gate Repair in Enterprise.

Written by the team at Vance Gate Repair.

Why Enterprise Chooses Vance Gate Repair Winchester

We set the standard for gate repair in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.
★★★★★

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

Camille R.
★★★★★

"Good work on a long driveway gate. Arrived when they said, finished when they said."

Sofia E.

Ready for Gate Repair in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(866) 983-9213

Request a Free Estimate in Enterprise

Tell us about your gate repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch