Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your driveway gate stopped dead in Green Valley or the operator on your Anthem entry gate is tripping its safety beam every time the wind picks up, we can help. Vance Gate Repair Winchester works on gate motors and openers throughout Henderson, from the 89052 corridor to older pockets near 89015. We know how this valley treats gate hardware: sun, dust, and caliche soil that shifts a post just enough to throw a slide gate off track. Our technicians have up to 12 years of experience, and we put the price in writing before we touch anything. Call (866) 983-9213 and a live person picks up.
Why Vance Gate Repair Winchester Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners research before they call, and we respect that. What they find with us is a written scope and a written price handed over before the job starts, not a verbal guess and a handshake. Under The Haven Standard, every visit also leaves a photographed record of what we found, what we set, and what we installed. Wiring diagrams, photo-eye readings, limit-switch positions: it all gets documented and left with you.
That documentation habit is why Henderson customers keep calling back. The 365-Day Done Right Promise covers every completed repair for a full year, so if something we fixed acts up again, we make it right at no additional charge. We also offer a free second opinion on any written estimate you’ve gotten from another gate company. Bring the paperwork.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson

Motor Repair
Repair is most of what we do in Henderson, and it’s the work we’d rather talk you into than a replacement. Heat kills operators here. A motor baked in direct sun through a 115°F July runs hotter and shorter than one mounted in shade, so we check the control board, the capacitor, and the safety circuit before recommending a new unit. If it’s a photo-eye knocked out of alignment by wind-blown dust, we reset it, test the loop detector, and photograph the corrected position.

Battery Backup
Summer outages and monsoon-driven power flickers leave plenty of Henderson gates stuck open. A battery backup keeps your operator running through the outage and closes the gate behind you when the grid drops. We match the backup to the motor already on your property, whether it’s a LiftMaster or a Mighty Mule, so you’re not buying a whole new system to get one feature.

Slide Motor
On tight lots where a swing gate won’t fit, a sliding gate is the answer, and Henderson has plenty of them. Restricted working space and frequent daily cycles wear the rack and pinion faster here, and caliche soil movement can shift the footing enough that the gate starts to jump or skip. We adjust or replace the rack and pinion, reset travel limits, and check that the gate tracks clean from open to close.

Motor Installation
New installation gets measured, ordered, and scheduled. There’s no same-day promise on an install because the right operator has to match your gate’s weight, your driveway geometry, and any HOA spec on the hardware. We give you a free measure and a written price, including the power run and safety edges, so you know the full number before anything is ordered.
Before
AfterTrusted Brands We Service in Henderson
We service nine major gate-automation brands, which means we work on the motor that’s already on your property instead of steering you toward a replacement. In Henderson that’s often a LiftMaster on a community gate, a FAAC on a heavy slide, an Elite or Mighty Mule on a residential driveway, and plenty more. We don’t claim to stock parts locally; we diagnose, order what’s needed, and turn it around fast. One company that can handle whatever’s bolted to your gate posts.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Henderson Homes

- Photo-eye misalignment from dust and debris. Wind-blown grit drifts across the beam and the operator reads a phantom obstruction, so the gate reverses or refuses to close. We realign the eyes and test the safety circuit so the fault clears for good, not just for a day.
- Motor overheating in full sun. An operator mounted with no shade runs past its thermal limit in a 110°F+ summer and shortens its own life. We check the duty cycle and talk through a sun shield or repositioning where the mount allows it.
- Post footing shifts on caliche soil. Caliche is hard until it isn’t, and a footing that moves even a quarter inch throws a slide gate out of alignment and chews up the rack and pinion. That’s a Henderson problem more than a Las Vegas one.
- HOA spec mismatches on replacement hardware. Green Valley and Anthem boards dictate exact gate colors, heights, and iron styles, so a replacement operator or bracket has to match the community’s approved spec or it doesn’t stay installed for long.
Pricing for Gate Motor & Opener in Henderson, NV
Here’s what gate motor and opener work runs in Henderson’s market. A safety-eye realignment or limit-switch reset typically lands around $95 – $180. Motor repair on a control board or capacitor usually runs $180 – $380, depending on the brand and what failed. A battery backup install is generally $250 – $500. Slide-motor rack and pinion work runs $220 – $550, and a full motor installation with a power run and safety edges lands in the $850 – $1,900 range for a residential gate. What moves the number is brand, gate weight, and whether the footing needs attention. Every price is quoted and agreed before any work starts. Call (866) 983-9213 for a free estimate.
We Also Serve Cities Near Henderson

Henderson sits on the east edge of the valley, and we cover the surrounding communities too. If you’re in Boulder City, Whitney, Paradise, or Enterprise, our Gate Motor & Opener team works the same written-price, documented-visit way. Learn more about Gate Motor & Opener in Henderson and the neighborhoods we cover across the east side.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson

Wind-blown dust and debris misalign the photo-eye, so the operator reads a phantom obstruction and reverses or refuses to move. Henderson’s persistent valley wind pushes grit across the beam more than most markets. We realign the eyes, clean the lenses, and test the loop detector. Call (866) 983-9213 and we’ll get it sorted.
Often you can, but it depends on clearance, gate weight, and swing radius. On tight Henderson lots where a swing gate won’t fit, a sliding gate is usually the better call. We measure on site and put the recommendation and price in writing before anything is ordered. Estimates are free.
The same 110°F+ summers that shorten a motor’s life also shorten a backup battery’s, so it needs checking more often here than in cooler markets. Heat degrades lead-acid cells and cuts their run time. We test the backup under load and replace it when it won’t hold. Call (866) 983-9213 for a check.
Community gates in Green Valley and Anthem need a motor rated for high traffic with a duty cycle that matches the use, plus hardware that matches the board’s approved spec. The right answer depends on gate weight and how many cars pass daily. We’ll spec it and price it in writing.
Usually a shifted footing on caliche soil or a worn rack and pinion, both common on Henderson slide gates. The footing moves enough to throw the gate out of alignment, and the rack wears from it. We check the track, adjust or replace the gear, and reset the travel limits. Estimates are free, so call (866) 983-9213.
If your gate motor is failing, your backup battery won’t hold, or your slide gate is skipping, call Vance Gate Repair Winchester at (866) 983-9213 for a free estimate. We’ll put the price in writing before any work starts and leave you a documented photo record of everything we found, set, and replaced. A live person answers around the clock.
Written by the team at Vance Gate Repair Winchester.