Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If a hinge has cracked, a post has gone crooked, or a rail is bent out of line, a written price for gate parts and welding work in Henderson is one call away at (866) 983-9213. We work the east side of the Las Vegas Valley constantly, so we know the difference between a Green Valley gate that needs a weld and an Anthem gate that needs its footing reset. That local reading is what keeps a small repair from turning into a second one three months later.
Why Vance Gate Repair Winchester Is Henderson’s Preferred Gate Parts & Welding Company
Henderson customers tend to come to us after a verbal estimate that never became a number. We do it the other way. Every job runs under The Haven Standard: a written scope, a written price, and a photo record of what was found, what was adjusted, and what was replaced. You see the price before anyone opens a toolbox.
Our technicians have up to 12 years of experience, and they carry that same documentation habit onto residential gates that came out of commercial access-control work. Under the 365-Day Done Right Promise, if a repair isn’t right, we make it right within that year at no additional charge. Bring a written estimate from another gate company and we’ll review it free.
When you call, a live person answers at any hour. No voicemail loop, no callback queue. We also know that a weld or part on a Henderson driveway gate is often judged against the community’s approved iron color, height and style, not just by whether it holds. That’s a local constraint we plan around on every visit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson

Henderson gate work tends to land in the same few places: welded hinge connections, posts set in stubborn desert soil, bent or fatigued rails, and hardware that has taken years of heat. Here’s how we handle each.
Hinge Replacement in Henderson
On sun-baked decorative gates in the 89052 corridor, hinge welds are the first thing to fatigue. We check whether the hinge or the post is the real source of a sag before cutting anything. If the hinge is the problem, we replace it and match the hardware to the gate’s finish so the repair doesn’t stand out.

Post Replacement in Henderson
Caliche-hard ground that still shifts is a rough combination for gate posts, and it’s why sliding gates across Henderson start to drag. A post that has skewed or loosened needs to come out and be reset, not shimmed. We photograph the new footing and the gate’s travel so the next technician has a record to work from.

Rail Repair in Henderson
Wind storms on the east side routinely bend lightweight aluminum rails and tweak the geometry of an otherwise sound gate. We straighten, re-weld or replace the damaged rail and then check that the panel still runs true through its full travel. A rail repair that ignores a bent track just hides the fault.

Custom Welding in Henderson
HOA specs are where custom welding gets specific. Green Valley and Anthem communities often fix the gate’s iron color and style, so a fresh weld has to match the approved finish rather than whatever bar stock is on hand. We work to that spec, then photograph the finished weld and note the part installed. For a locked latch or a gate that won’t stay shut, our Gate Parts & Welding team also handles latch and lock, gate rollers, and full hardware replacement.
Before
AfterTrusted Brands We Service in Henderson
Most Henderson gates we see are running on operators from the major automation brands, and the gate hardware has to work with whatever motor is already on the property. We service Elite, LiftMaster, FAAC and the other brands common on residential gates, and we don’t steer you toward replacement when a repair is what the gate needs. We don’t stock parts and we won’t claim to. What we do is source the right component and give you its part number in writing, so the fix is traceable. That works across the range of operators Henderson homeowners actually have.
Common Gate Parts & Welding Problems We See in Henderson Homes

- Cracked hinge and rail welds on 89052 and Anthem gates. Wind-whipped, sun-baked decorative gates crack at the welds long before the metal itself fails. The heat and dust wear the connection faster than the gate’s age suggests.
- Posts that skew in shifting soil. Henderson’s caliche-hard ground still moves, so a post loosens and the gate starts to drag or a hinge sags at the hinge post. Rollers get blamed; the post is usually the cause.
- Lightweight aluminum bent by wind storms. A gust can tweak an aluminum panel out of line across the east side, which throws off the operator’s travel. Re-welding the rail without realigning the panel leaves the fault in place.
- HOA finish mismatches after a repair. A replacement part or fresh weld that doesn’t match the approved iron finish reads as a violation. Matching the community spec is part of the job, not an afterthought.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Henderson, NV
A typical hinge replacement in Henderson runs $150 – $350 per hinge, and a post replacement usually falls between $350 and $900 depending on footing depth and access. Rail repair tends to run $200 – $500, and custom welding matched to an HOA iron spec runs $250 – $600. The biggest cost drivers are the post footing, the finish match, and how tight the working space is on a shared driveway. You get the flat price in writing before any work starts, and it doesn’t change at the end. That’s Haven Standard Clause 1, on every visit. Estimates are free.
We Also Serve Cities Near Henderson

Henderson keeps us busy, and we cover the surrounding communities too. If you’re in Boulder City, Whitney, Paradise or Enterprise, the same written-price, documented-record approach applies. Call (866) 983-9213 and we’ll tell you straight what the gate needs. For everything we do across the area, see Gate Parts & Welding in Henderson.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson

Yes. We work to the community’s approved iron finish, height and style rather than defaulting to whatever bar stock or component is on hand. That means checking the spec before we weld and matching the replacement part to it, then photographing the finished work so you have a record if the HOA asks. In Green Valley and Anthem, this is standard on most of our gate work. Call (866) 983-9213 to walk through your community’s spec.
Because the rollers usually weren’t the real problem. On Henderson gates, a post loosened in caliche-hard but shifting desert soil skews the track and makes the panel drag, so new rollers just ride a crooked line. A qualified pro checks the post footing and hinges before touching the panel. Fixing the panel without the post fixes it twice. Call (866) 983-9213 for a free look at the footing.
Often, yes. On shared-driveway and rights-of-way lots where swing clearance is tight, a slide gate keeps the vehicle and pedestrian path open and avoids swinging into a neighbor’s space. We size the gate to the available travel and keep access working during the job. Call (866) 983-9213 and we’ll measure the site and give you a written recommendation.
Most often it’s a misaligned photo-eye or a panel knocked out of line, not a failed motor. Wind storms on the east side bend lightweight aluminum or shift a panel enough that the safety beam reads an obstruction and the operator refuses to close. We check the photo-eye alignment and the panel travel together. Call (866) 983-9213 and we’ll diagnose it on site.
Usually in place if the post is sound; out if the post has skewed. We test the footing and the hinge weld first, because a hinge repaired onto a moving post will crack again. When the post is the problem, we reset it and re-weld to the approved finish. Whichever way it goes, you get the finding and the price in writing first. Call (866) 983-9213 for a free estimate.
Get a Written Price for Your Henderson Gate Repair
Whether it’s a cracked hinge weld in Anthem, a dragging slide gate off the 89052 corridor, or a post that needs resetting, the next step is the same: call (866) 983-9213 for a free estimate, get the price in writing before work starts, and get a documented photo record when we leave. A live person answers any hour.
Written by the team at Vance Gate Repair Winchester.
