Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Whitney
If your driveway gate is dragging, your keypad entry has gone dead, or a hinge post has started to lean, we handle the parts, welding, and adjustment work that fixes it properly. Whitney sits on the southeast edge of the valley, and gate work here means driveway and side-yard swing and slide gates hung on block-wall lots, not decorative estate ironwork. We know what the afternoon sun and the caliche soil in 89122 do to gates and operators. Call (866) 983-9213 and a live person picks up, day or night, and we’ll get a written price in your hands before any tool comes out.
Why Vance Gate Repair Winchester Is Whitney’s Preferred Gate Parts & Welding Company
Whitney homeowners research before they call. They want to see a price, a record, and a plan, not a promise. That’s how we work: under the Haven Standard, every visit starts with a written scope and a written price, and ends with a photographed record of what we found, what we set, and what we installed. If a repair isn’t right, our 365-Day Done Right Promise has one full year to make it right at no additional charge.
A typical Whitney gate problem starts when a swing gate on a block-wall lot begins to drag and the keypad or LiftMaster operator cuts out after a few summers. The hinge post has usually shifted in the caliche soil, and the operator box has baked in the afternoon sun. A qualified local pro re-plumbs the hinge post to a proper footing, corrects the sag, and seals and rewires the operator for heat before replacing hinges or a latch. Our technicians have up to 12 years of experience, and they’ve worked the whole range of residential operators: LiftMaster, FAAC, DoorKing, Mighty Mule, and the rest of the nine major brands we service.
We’re independently owned and operated, backed by 22,000+ gates repaired and installed since 2014, and we don’t leave a job without a documented photo record of every adjustment. If you’ve got a written estimate from another gate company, we’ll review it free, and give you an honest second opinion on what needs to be done.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Whitney

These are the sub-services we’re called out for most in Whitney, and they’re the ones where the local soil and heat change the fix.
Hinge Replacement
Shallow-set posts shift in the caliche soil, so hinges take the stress long before they wear out on their own. We replace hinges after checking post alignment, so we don’t cover a sagging post with new hardware and watch it fail again in a season. New hinges come set and photographed, with the part number recorded.

Post Replacement
This is the most common repair we see in 89122. A hinge post that’s shifted in the soil needs to be re-plumbed to a proper footing, and we set and align it before re-hanging the gate. It’s slow, dirty work, and it’s the durable fix. Skipping it just moves the problem to the hinges.

Custom Welding
Custom welding keeps your existing gate in service rather than replacing a frame that still has plenty of life. We weld broken hinge brackets, cracked rails, and worn latch stops on block-wall lots, and match the finish where we can. If you need a new section fabricated to match, we’ll quote that as a separate scope.

Rail Repair
Monsoon wind gusts jump slide gates off their rack and pinion and strip loosened hinges. We repair bent and cracked rails and re-set the gate on the track. Then we check the rollers, because a punched-out roller is usually what caused the jump.
If you want the full picture of our Gate Parts & Welding work, that page covers the rest of what we do.
Before
AfterTrusted Brands We Service in Whitney
We work on the operator that’s already on your property instead of steering you toward a replacement. That covers LiftMaster, FAAC, DoorKing, Mighty Mule, Elite, BFT, Linear, Viking, and Ghost Controls. We don’t claim to stock every brand’s parts on a shelf; what we do is identify the model, check what’s actually failed, and order exactly the part the repair needs. That keeps turnaround reasonable without gutting a working system. We can also review any other written estimate at no cost.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Whitney Homes

- Hinge post creep. Shallow-set posts in caliche soil shift after seasonal ground movement, and the swing gate starts to sag and stress its hinges. You’ll feel it as drag near the latch side.
- Sun-baked operator failure. UV and extreme heat cook keypads, operator boxes, and seals. Intermittent operation or a dead LiftMaster keypad after three or four summers is usually heat, not a defective unit.
- Monsoon jump-off-track. Wind gusts and sudden downpours strip loosened hinges or jump slide gates off the rack and pinion, which then needs rail repair and fresh rollers.
- Block-wall gate stress. Gates hung on steel posts alongside CMU fence lines pull and shift with the wall. We check the post-to-wall relationship before touching hardware.
Pricing for Gate Parts & Welding in Whitney, NV
Here’s what the work actually runs in Whitney’s market, quoted and agreed before any tool comes out.
- Hinge replacement on a standard driveway gate: $180 – $340, per hinge pair
- Hinge post replacement with re-plumbing to a new footing: $650 – $1,400
- Rail repair or re-welding of a bracket or stop: $150 – $400, depending on finish
- Latch and lock replacement, heavy-duty: $140 – $320
- Roller replacement on a slide gate: $120 – $280
- Custom fabrication to match existing ironwork: quoted per section after a measure
A typical post replacement in Whitney runs $650 – $1,400, and most hinge jobs land between $180 and $340. The price depends on post depth, footing condition, and finish matching. We measure first, then hand you the number in writing. Estimates are free, and we’ll review any other company’s written estimate at no cost. Call (866) 983-9213.
We Also Serve Cities Near Whitney

The same written-price, documented-record approach works on gates just outside Whitney, in Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re nearby and after gate parts and welding in Whitney or the surrounding east valley, we handle it the same way. The soil and sun don’t stop at the ZIP line.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Whitney

Whitney’s caliche soil moves with seasonal ground movement, and shallow-set hinge posts go with it. A gate that’s fine elsewhere can sag here within a few summers because the post itself has shifted, not because the hinges failed.
Heat and UV bake the operator box, keypad, and seals until the unit cuts out intermittently or dies. The fix is sealing the wiring for UV and heat and checking the box’s sun exposure, not necessarily replacing the motor.
Yes. We weld and fabricate to match existing ornamental iron, rails, hinge brackets, and latch stops, and we quote the fabrication as its own written scope. For heavier bespoke gates, we measure first, then hand you a written price.
Check whether the post is still plumb and whether the gate sags at the latch side. If the post is leaning or the gap changes with the season, it’s the post. We verify alignment before quoting, so we don’t sell you hinges that won’t hold.
Automatic gates should have a photo-eye beam that stops the gate if something crosses the path, plus proper signage and a way to disengage the operator in an emergency. If your gate is missing any of these, we’ll flag it in writing on the visit.
Call (866) 983-9213 for a free estimate. A live person answers at any hour, we’ll put the price in writing before any work starts, and every visit leaves a photo record behind.
Written by the team at Vance Gate Repair Winchester.