Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If your gate has sagged, seized, or stopped tracking straight, we work on it in Boulder City with the equipment and the paperwork to match the job. Every call starts with a written price before any work begins, and we answer the phone at any hour – (866) 983-9213. Boulder City isn’t a typical Nevada suburb for gate work: half the driveways here sit behind iron and stucco that predates most of the valley, and the other half are newer custom builds where the gate hardware was undersized from day one. We know the difference, and it changes what we quote you.
Why Vance Gate Repair Winchester Is Boulder City’s Preferred Gate Parts & Welding Company
Our technicians have up to 12 years of experience, and the working habit we carry onto every Boulder City gate came out of commercial access-control work: photograph what’s there, write down what you measured, and leave a record the next person can actually read. When we look at a gate in the Historic District or out toward the newer custom lots, we can tell you what brand of operator you’re running – LiftMaster, Elite, DoorKing, Linear – what the hinge posts are actually anchored into, and what the repair will cost before a tool comes out of the truck.
Boulder City customers tell us the same thing in different words: they want the price on paper, not floating in the air. That’s the whole of The Haven Standard, Clause 1 (Have it in writing). Under Clause 4 (Evidence on every job) you get a photo log of what we found, what we adjusted, and the part numbers we installed. Every completed repair is covered by the 365-Day Done Right Promise – if it isn’t right within that year, we make it right at no additional charge. A free second opinion on any written estimate from another company is yours for the asking. Bring the paperwork and we’ll read it through with you.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City

The work that lands on our schedule in Boulder City is narrower than the general gate-repair market, and it’s shaped by the housing stock. The three that come up most on Gate Parts & Welding calls are hinges, posts, and welding. Here’s how each one plays out locally.
Hinge Replacement
A hinge replacement in Boulder City is rarely just a hinge. In the Historic District a large share of the wrought-iron pedestrian and driveway gates hang on stucco-and-masonry piers built in the 1930s, and pulling the old hinge often reveals a rusted anchor bolt or a cracked stucco face behind it. If the pier itself needs patching, that repair is where the job gets sized – and we’ll tell you before we start whether it stays a $180-$320 hardware swap or becomes masonry work.

Post Replacement
A hinge post that has shifted out of plumb is the cause behind a lot of gates that “just sag.” On Boulder City’s caliche-heavy soil, post footings sometimes were never set deep enough to begin with – the ground here is stiff and dense, and a shallow footing will hold for a few years before the post starts leaning. Replacing a post properly means cutting out the old footing, setting concrete, and re-hanging the gate square. Typical post replacement here runs $450-$900 depending on depth, access, and whether the gate has to come down for the set.

Rail Repair
Bent or twisted rails on a slide gate or swing gate are the easiest thing to spot and sometimes the hardest to fix without weakening the frame. On a wrought-iron rail, the repair is usually a cut-and-weld or a reinforcement strap rather than a swap, so the gate keeps its original proportions. On newer gates with steel tube frames, a bent bottom rail often points to a dragging roller – we check the rollers and track before we quote the rail weld.

Custom Welding
Custom welding in Boulder City covers the pieces no catalog sells: repair splices on original ironwork, reinforced corner gussets on a gate frame that’s cracking at the miter, new latch receivers welded onto a masonry pier, and swing-arm brackets that were never mounted properly. When a repair has to match the shape and weight of a gate that’s been on the property since before most of the valley was paved, welding is often the honest answer instead of replacement.
Before
AfterTrusted Brands We Service in Boulder City
We work on whatever operator is already mounted to the gate, rather than steering you toward a swap. Boulder City properties turn up a mix: LiftMaster and Elite on newer custom builds, DoorKing on heavier swing gates and access-controlled driveways, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule on everything in between. We service all nine. What we don’t do is claim parts stock we don’t hold – parts are ordered to the specific model, and we tell you the lead time and the price up front so you can plan around it. If our first visit doesn’t have what the job needs, your written quote still stands.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Boulder City Homes

- Builder-grade operators on newer custom homes that run rough. When the power and conduit runs were never sized or trenched properly during construction, you get voltage drop at the operator, and voltage drop makes a gate act like it’s failing when the motor is fine. We measure the supply at the operator before we touch the control board, because replacing a good motor doesn’t fix a bad feed.
- Original wrought-iron gates on 1930s masonry piers with failed hinges and latches. Hinge pins seize in the pier anchors, and the loosening stress shows up as cracked stucco and a gate that drops at the latch side. These jobs often need masonry repair before new hardware goes back on, and in the Historic District that repair can trigger a preservation compliance step that most Nevada suburbs never see.
- Hinge posts shifting in caliche and monsoon wash soil. Boulder City’s dense caliche and dry-wash flooding both work against a shallow footing: the ground heaves and erodes, the post leans, the gate sags, and a slide gate’s loop detector can get knocked out of alignment by the same settling. If the gate tracks crooked, we check the post plumb before we blame the motor.
- Sun-baked finishes and warped wooden pickets. Summer heat over 100°F fades powder coat, dries out hinge pins and latch springs, and warps wooden gate pickets until the latch no longer catches cleanly. On a wood gate, the latch and hinge repair usually needs to come with a call about the picket condition or it won’t hold.
Pricing for Gate Parts & Welding in Boulder City, NV
Here are the ranges we quote most often for Boulder City gate parts and welding work. The price is written and handed to you before any work starts – there’s no invoice surprise at the end.
- Hinge replacement (standard pair, hardware swap only): $180 – $320
- Latch and lock replacement: $120 – $260
- Hinge or latch repair that requires masonry or stucco patching: $350 – $750
- Hinge post replacement with new concrete footing: $450 – $900
- Rail repair – cutting and welding a bent or cracked rail: $220 – $520
- Custom welding on site (bracket, gusset, splice, receiver mount): $280 – $650
- Gate roller replacement (set): $140 – $300
- Adding automation to an existing manual swing or slide gate: $1,400 – $2,800, including operator and hardware, before any power or conduit run
- New dedicated power and properly trenched conduit to the gate operator: quoted on measurement, usually $900 – $2,400
What moves the number up or down: whether the gate has to come off its hinges to do the job, how much masonry or footing concrete is involved, whether the operator is a model we can source parts for quickly, and site access. On a Historic District property, add design-review time if the repair touches the visible fabric of the pier or gate style – that’s a compliance step, not a labor cost, and we’ll flag it in the written scope so nothing comes as a surprise. Estimates are free, and we provide a free second opinion on any written estimate you’re holding from another gate company.
One local note worth the paragraph: Boulder City is one of the only towns in Nevada whose core was laid out by the federal government in the 1930s as a planned community for Hoover Dam workers. That history didn’t just leave a distinctive streetscape in the Historic District – it left a specific repair problem. A large share of those homes still have their original wrought-iron gates hanging on stucco-and-masonry pillars, and the city’s design-review culture means any repair that touches those pillars or the gate’s visible style has to go through preservation review. Most gate companies in the valley have never dealt with it. A hinge that would be a 45-minute swap anywhere else in Nevada can turn into a documented scope, a materials match, and a compliance step here. It’s why we photograph the existing hardware before we touch it and write the scope as if a reviewer will read it – because here, sometimes one does.
A typical scenario we quote on newer Boulder City custom homes looks different: the builder installed a LiftMaster or Linear operator on a swing gate, and now the gate binds and the motor runs hot. The hinge post was set in caliche without a proper concrete footing, so the post has shifted and the gate sags. The right sequence is to correct the sag at the hinge post first, then inspect the operator’s rack and pinion for wear, then confirm the safety photocell is aligned and working. We do that in order and photograph each step. Replacing the motor first is how you end up paying twice.
We Also Serve Cities Near Boulder City

We take gate repair and welding calls across the surrounding area, including Henderson, Whitney, Paradise, and Enterprise, and the same documentation and written-price standard applies to every job. If you’re searching for Gate Parts & Welding in Boulder City and want a straight answer on price and local conditions before you book, call (866) 983-9213.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City

Sometimes, but only if the anchor in the pillar is still sound. On 1930s stucco-and-masonry piers, the old hinge pin often seizes in its anchor, and pulling it can crack the stucco face or reveal a rusted bolt. If the pillar itself has failed, the repair moves into masonry, and in the Historic District a repair that touches the visible pillar or gate style can trigger design review. Our visit starts with an inspection of the anchor, a written scope, and a photo of the pier before we quote – so you know whether it’s a hardware swap or a preservation-aware repair. Call (866) 983-9213 for a free estimate.
Most often the operator is fine and the power feed isn’t. On newer custom homes, the builder-grade operator was installed onto a gate that’s now binding at a shifted hinge post, or the dedicated power run was never sized and trenched properly, so voltage drops at the motor and the control board reads it as a fault. We measure the supply voltage at the operator before we touch the board, then check the gate’s travel and the safety photocell. Call (866) 983-9213 and we’ll quote the diagnosis and the repair in writing before any work starts.
Caliche – the dense, cemented soil layer across much of the area – makes for a stiff but shallow footing, and it doesn’t hold like ordinary dirt. A hinge post set too shallow can sit fine for a few seasons, then lean and drop the gate. Monsoon-season wash flooding adds erosion, especially on slide gates where loop detectors get knocked out of alignment by settling. Proper replacement means cutting out the old footing, pouring a deeper concrete set, and re-hanging the gate square. We quote post replacement in writing, usually in the $450 – $900 range. Call (866) 983-9213 for an exact quote.
Yes, and it’s almost always scheduled rather than same-day – the site gets measured, the operator is ordered, and the install is booked in writing. The bigger question on an older gate is whether the hinge posts and gate frame will carry an operator at all; the gate has to swing or slide freely with a good footing before the motor goes on. We’ll measure the gate, check the posts, and tell you what operator options fit what’s already there from brands like LiftMaster, Elite, or Mighty Mule, along with any power and conduit work the install needs. Call (866) 983-9213 for a free measure and a written price.
An automatic gate operator needs a functioning safety device that stops or reverses the gate when something crosses its path – typically a photocell (the infrared beam pair) plus, on swing gates, a monitored sensing edge. On a residential driveway, that’s the minimum expected set, and it’s also the first thing we check on any operator that’s acting erratically. If the safety devices are missing or dead, we flag it in the written scope. We test and photograph the aligned position on every visit. Call (866) 983-9213 and we’ll quote the repair or the safety-device add-on in writing.
Written by the team at Vance Gate Repair.