Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Enterprise, NV
If your driveway gate has stopped opening, is dragging on the pavement, or the motor runs but nothing moves, we can help. Vance Gate Repair Winchester handles gate repair, motors, access control, and installation across Enterprise, NV and the 89139 ZIP code, and a live person answers our phone around the clock. We price the work in writing before we pick up a tool, photograph what we find, and leave a record behind. Call (866) 983-9213 and we’ll get a technician scheduled.
Why Enterprise Homeowners Choose Vance Gate Repair Winchester
Most of the gates we see in Enterprise sit behind a block wall in a planned community, which changes the job. Before anyone touches a post or a finish, the homeowner often needs to know whether the repair will match what the HOA’s design review expects. We work that way by default: every visit is documented under The Haven Standard, so you get a written photograph record of what was found, what we set, and what we installed, filed on the job and left in your hands. Our technicians have up to 12 years of experience, and we service nine major automation brands, so we can work on the motor that’s already on your property rather than steering you toward a replacement. Around the Mountain’s Edge side and the gated streets off Blue Diamond Road, homeowners tend to research first and want the price visible before they call, and that’s how we’re built to work. A written flat price comes before any labor starts, and the 365-Day Done Right Promise covers the repair for a full year.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Enterprise

Gate Repair
Hinge sag, footing shift, bent frames, and motors that run without moving the gate are the calls we get most in Enterprise. We diagnose the actual cause, not just the symptom, and photograph the adjustment before we leave. Learn more about Gate Repair in Enterprise.

Gate Installation
New driveway gates, side-yard RV gates, and courtyard entries, measured and matched to your community’s design standards before anything is ordered. This is scheduled work, not same-day, and you get a free measure and a written price up front. Learn more about Gate Installation in Enterprise.

Gate Motor & Opener
We service LiftMaster, FAAC, Elite, and six other brands, so we work with the operator already on your gate rather than pushing a swap. Limit switches, photo-eyes, and arm brackets all get tested and documented. Learn more about Gate Motor & Opener in Enterprise.

Gate Access Control
Keypads, remotes, intercoms, and entry systems for driveways and side gates, set up so the people who should get in can and everyone else can’t. We leave a written record of the code structure and wiring.
Gate Parts & Welding
Replacement hinges, rollers, latches, and on-site welding for ornamental steel and wrought-iron frames. We match the existing finish and profile so the repair passes architectural review. Take a look at our home page for the full picture of what we handle.
Before
AfterNeighborhoods We Serve in Enterprise
We work throughout Enterprise and the surrounding 89139 area, typically reaching most neighborhoods the same day for repair calls. A few of the communities we’re in regularly:
- Mountain’s Edge and the streets near Blue Diamond Road
- Southern Highlands-adjacent planned communities
- The tract neighborhoods off Decatur Boulevard and Warm Springs Road
- Gated enclaves along Silverado Ranch Boulevard
See the difference
Before
After
Before
After
Before
AfterWhy Enterprise’s Climate & Housing Affect Gate Repair

Enterprise was built almost entirely in the 1990s and 2000s as master-planned suburbia, so the housing stock is Mediterranean and Southwestern stucco tract homes with block-wall perimeter fences. That means most of the gates here are ornamental steel or wrought-iron on powder-coated or painted frames, with newer builds adding vinyl and composite. The desert does a number on all of it. Summer highs routinely push past 105°F, and the UV bakes powder-coat and paint until they fade and chalk, warps vinyl, and dries out wood. Then there’s the soil: caliche-heavy ground makes gate-post footings hard to dig and prone to shifting, which is why hinge sag and footing failure are the dominant repair calls in Enterprise. When a post moves, the gate drags, the motor strains, and a small footing problem turns into an operator problem if it’s left alone.
Pricing for Gate Repair in Enterprise
Most gate repairs in Enterprise fall between $150 and $450, depending on whether we’re resetting a hinge, realigning a photo-eye, or re-setting a footing. Motor and opener repairs generally run $200 to $600, and a full motor replacement typically lands between $550 and $1,200 based on the brand and whether the arm bracket is intact. Installation is quoted after a free measure. Whatever the job, the flat price is written and handed to you before work begins, so there’s no surprise invoice at the end. Call (866) 983-9213 for an exact quote; estimates are free.
Service Area – Cities Near Enterprise

Enterprise sits close to several communities we also cover. If you’re nearby in Spring Valley, Paradise, Winchester, or Henderson, we can help there too. Call and we’ll confirm coverage for your address.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Enterprise

Most repairs run $150 to $450, with motor work at $200 to $600 and full motor replacement around $550 to $1,200. The exact flat price is written before work starts. Call (866) 983-9213 for a free estimate.
In most cases yes for repair calls in Enterprise, and a live person answers our phone 24/7. Call (866) 983-9213 and we’ll tell you the soonest we can be out.
We match the existing finish and gate profile so your replacement passes architectural review, which matters in Enterprise’s planned communities where a mismatch gets rejected even if the gate works. Installation is scheduled after a free measure and a written price.
A full installation includes the measure, the gate and hardware, post setting, and finish matching, all quoted in writing beforehand. We also handle the power run and safety edges where the setup requires them. Call (866) 983-9213 to schedule a free measure.
That usually points to a stripped drive gear, a broken arm bracket, or a limit switch set past travel, and we diagnose which before quoting. We photograph the adjustment so you can see what changed. Call (866) 983-9213 and we’ll take a look.
When your gate stops working, the fix starts with a clear answer and a written price, and that’s what we deliver in Enterprise. Call (866) 983-9213 for a free estimate, and we’ll get a technician out, document what we find, and leave you with a record of the repair.
Written by the team at Vance Gate Repair Winchester.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Enterprise Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.