Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across North Las Vegas
If your gate is dragging, a hinge has pulled loose from the post, or a weld let go after the last windstorm, we handle it. We work gate parts and welding across North Las Vegas, from the newer tracts off the 215 in 89031 to the older chain-link driveways closer to downtown. Our technicians have up to 12 years of experience, and a live person answers the phone 24 hours a day, so you’re not waiting on a callback queue. Call (866) 983-9213 and we’ll get a technician scheduled.
Why Vance Gate Repair Winchester Is North Las Vegas’s Preferred Gate Parts & Welding Company
Most of what fails on a North Las Vegas gate isn’t the panel. It’s the hardware underneath, and the fix only holds if whoever does it understands why it failed. Our technicians work on nine major automation brands and can service whatever motor is already on the property instead of steering you toward a replacement.
Every visit leaves a documented photo record: what we found, what we adjusted, what part went in, and the part number. You get a copy, and it’s filed in the job record so the next technician starting from scratch can see exactly what was done. That documentation habit came out of commercial access-control work and it applies to every residential gate we touch.
Pricing is written before anyone picks up a tool. The flat price is handed over first, and if a repair isn’t right, our 365-Day Done Right Promise means we make it right within a full year at no extra charge. If you’ve got a written estimate from another company, bring it. We’ll review it at no cost as a free second opinion.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in North Las Vegas

Post Replacement
In North Las Vegas’s northern master-planned tracts, the hinge post is the part most often set for a person pushing a gate by hand, not for an operator arm pulling on it. When the footing wasn’t sized for automation, it moves, and the gate sags at the hinge side. We replace and reset posts to carry the load they’re actually under.

Hinge Replacement
Blowing caliche dust packs into hinge barrels and grinds them down. Replacing a hinge in North Las Vegas usually means correcting the sag at the post rather than the panel, then cleaning and re-lubing so the new hardware isn’t wrecked on day one. Our Gate Parts & Welding team can handle hinge replacement on its own or as part of a bigger repair.

Rail Repair
Windstorms that sweep across the open desert into the newer tract backyards rack swing gates and bend rails out of line. We straighten or replace damaged rails, re-level the gate, and check that latches and rollers still line up afterward.

Custom Welding
HOA-approved decorative metal and stucco-and-wrought-iron pedestrian gates in the newer North Las Vegas tracts fail at the welds and finish under intense UV. We weld and refinish to match the community’s approved color and style, so the repair doesn’t stand out.
Before
AfterTrusted Brands We Service in North Las Vegas
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. If your gate runs on a Ghost Controls system or an older DoorKing unit, we work on what’s there. We don’t stock parts on a truck or promise a brand-specific parts shelf, so turnaround depends on the part; simple hardware repairs often happen on the first visit, while something like a proprietary operator bracket or control board gets ordered and scheduled. No brand steering: if a repair is the right call, we repair.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in North Las Vegas Homes

- Manual gates retrofitted with an operator after the build. No power and no conduit ran to the post during construction, so the opener ends up on an undersized extension or a solar unit that can’t keep up in desert heat. The gap shows up within months.
- Sag blamed on the panel when it lives at the hinge post footing. Wind-driven dust grinds the rollers and hinges, and the sag shows up at the post. Rails and latches get blamed first, which is why a latch keeps re-failing.
- Failed welds and finish on decorative metal. Intense UV and heat destroy paint and composite fillers on HOA-approved pedestrian gates faster than in milder climates, so welds and finishes need renewal on a shorter cycle.
- Rollers and hinges packed with caliche dust. The same grit that blows off the open desert migrates into every moving part. Lubrication alone won’t fix a hinge or roller already ground down; the part has to be replaced and the gate re-leveled.
Pricing for Gate Parts & Welding in North Las Vegas, NV
Most hinge replacements in North Las Vegas run $95 to $180 per hinge, depending on the style and whether the post needs correction. Post replacement with a new footing typically runs $300 to $650. Rail repair runs $150 to $350, and custom welding and finish-matching $200 to $450 depending on the section and finish. A typical small hardware job runs $150 to $400; a larger one combining a post, hinges, and re-leveling can push higher. The wind-and-sun reality here means gates need this hardware renewal more often than in milder climates, so budget for it. The flat price is written and handed over before any work starts.
We Also Serve Cities Near North Las Vegas

Beyond our work across Gate Parts & Welding in North Las Vegas, we serve customers in Las Vegas, Sunrise Manor, Winchester, and Whitney. The same retrofit and dust-and-UV problems show up across the valley, so the approach travels well.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in North Las Vegas

The hinge post and hardware were sized for hand-pushing, not for an operator, so the arm strains and the factory time-out trips. The fix is to correct the sag at the hinge post, re-level the gate, and confirm the arm geometry, not to keep resetting the operator. Call (866) 983-9213 for an exact quote, estimates are free.
Wind-driven caliche dust has already ground the moving parts down, so lube just delays the noise. Worn rollers and hinges need replacing, and the gate re-leveled so they carry the weight evenly. Call (866) 983-9213 for an exact quote, estimates are free.
Yes, on a properly sized gate where trenching for a power run isn’t practical, but the panel and battery have to be matched to draw and desert heat. A marginal setup will lose power in summer. Call (866) 983-9213 for an exact quote, estimates are free.
Usually, yes. We match the community’s approved color and style so the repair blends in. Bring the HOA spec or write-up where you have it, and call (866) 983-9213 for an exact quote, estimates are free.
Start at the post. The footing or hinge is where racking usually originates, and straightening the panel without fixing the post just moves the problem. Call (866) 983-9213 for an exact quote, estimates are free.
Call (866) 983-9213 for a free estimate. A live person answers 24 hours a day, and a uniformed, background-checked technician arrives with their name and photo sent ahead. The written price is in your hands before any work starts.
Written by the team at Vance Gate Repair Winchester.