Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Summerlin
If your driveway gate stopped opening, reverses halfway, or clicks without moving, we can help. Vance Gate Repair Winchester handles gate motor and opener work across Summerlin, and a live person answers the phone 24 hours a day. Our technicians have up to 12 years of experience, we price in writing before any tool comes out, and we leave a photo record of every adjustment. Most motor repairs in Summerlin run $240 – $520 depending on the brand and what failed. Call (866) 983-9213 and we’ll get a written price to you.
Why Vance Gate Repair Winchester Is Summerlin’s Preferred Gate Motor & Opener Company
Summerlin is a specific kind of gate market. The 89135 communities are master-planned, HOA-governed, and the gates were built to a single decorative standard, which means the work here is as much about matching hardware and finish as it is about the motor. We know that, and we price and document accordingly. Our Gate Motor & Opener team services nine automation brands, so we work on whatever operator is already on your gate instead of steering you toward a replacement.
Every visit under The Haven Standard leaves you a written scope, a written price, and photographs of what we found, what we set, and what we installed. That record matters in Summerlin, where HOA board members and the next technician both want to know what was done. We’re independently owned and operated, dispatch background-checked, uniformed technicians, and we provide the technician’s name and photo before arrival. Free second opinion on any written estimate from another company: bring the paperwork and we’ll review it at no cost.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Summerlin

Motor Installation
Adding automation to a Summerlin gate that was installed manual is the job we do most here. Before an operator goes on, we check that the hinge post and footing can carry the torque and daily cycling, because a wobbly post will drag any new motor into early failure. We then match a LiftMaster or Linear operator to the panel’s actual measured weight, wire it properly, and confirm the safety photocell trips. Installation is a measured, scheduled job with a free on-site measure and a written price, not a same-day dispatch.

Motor Repair
When a Summerlin operator short-cycles, reverses mid-travel, or stops responding, we diagnose before we quote. We check the control board, the limit switches, the drive, and the gate’s physical sag, then write the price on the spot. Most motor repairs in Summerlin run $240 – $520. If the repair isn’t right, the 365-Day Done Right Promise covers it: one full year for us to make it right at no additional charge.

Linear Motor
Linear is one of the most common operators on Summerlin’s newer driveways and courtyard gates, and its control boards and plastic components take a beating from the Mojave UV and triple-digit summers. We service Linear slide and swing operators, correct the mounting and alignment, and replace the components that bake out first. Before we leave, you get the photo log and the part numbers installed.

Slide Motor
Slide gates in Summerlin’s master-planned communities collect abrasive dust-storm grit in the track and the rack and pinion drive, which grinds the panel and wears the motor faster than most homeowners expect. We clean and re-lubricate the drive, correct the track alignment, and service or replace the slide operator. When hardware gets swapped on a decorative panel, we color-match the touch-up so it stays HOA-compliant.
Before
AfterTrusted Brands We Service in Summerlin
We service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in Summerlin, where builder-grade operators and later homeowner upgrades means you’ll find almost anything on a gate. We don’t claim to stock parts locally; we identify the correct part, order it, and schedule the return visit with a written price. One company that can work on whatever motor is on the property, rather than a company that only sells one brand.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Summerlin Homes

- Builder-grade operators cooked by the desert. Control boards and plastic components fail after years of UV and triple-digit summer heat, causing short-cycling or mid-travel reversal. The fix is usually a board and component replacement matched to the gate, not a new motor.
- Dust-storm grit in the drive. Abrasive grit packs into slide-gate tracks and rack and pinion drives, accelerating wear on panels that were originally installed as manual assemblies with no powered cycling in mind.
- Hinge posts that were never sized for power. Original 1990s – 2010s hinge posts and footings sag under powered cycling, and the gate drags the operator into premature failure. We check the footing before we touch the motor.
- No power run where the gate needs it. Many Summerlin gates have no conduit or power path to the operator location, so adding automation means planning the run and the safety edges as part of the job, not an afterthought.
Pricing for Gate Motor & Opener in Summerlin, NV
Here are the Summerlin ranges, written in dollars before you pick up the phone. A motor repair in Summerlin typically runs $240 – $520 depending on the brand and what failed. A full motor installation on a Summerlin gate, including the operator, wiring, and safety photocell, runs $950 – $1,900, and a bit more if the hinge post needs correction or a power run has to be added. Battery backup adds $210 – $410 installed. A slide motor service runs $290 – $560. The price is quoted and agreed before any work starts; there’s no “call for a quote,” and no surprise invoice at the end. Free on-site measure and written estimate on installations.
We Also Serve Cities Near Summerlin

We cover Summerlin and the surrounding valley. If you’re in Summerlin, Spring Valley, Las Vegas, Winchester, or Paradise, we can get an estimate to you. The same written-price and photo-record standard applies everywhere we work in the valley.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Summerlin

Not safely, no. Nearly every Summerlin 89135 gate was installed as a manual decorative wrought-iron or vinyl assembly to a single master-association design standard, so the panel and hinge post were never engineered for the torque and daily cycling a motor imposes. Before any operator goes on, a technician checks that the footing is sound and corrects any sag, then matches the operator to the panel’s actual weight and verifies the safety photocell. Call (866) 983-9213 for a free on-site measure and written price.
Mid-travel reversal usually means the operator is sensing resistance, and in Summerlin the resistance is often a combination of UV-baked control board components, a sagging hinge post, and dust grit in the drive. We diagnose the cause rather than guessing at the motor. Most repairs in Summerlin run $240 – $520, and the price is written and agreed before we touch anything. Call (866) 983-9213 for an exact quote.
HOA approval is almost always required in Summerlin because the community standard governs appearance, and permit requirements depend on the scope of the electrical work. We plan the design and the power path so the job is documented and can be reviewed by the board. Call (866) 983-9213 and we’ll walk you through what your community requires before scheduling.
Yes, in Summerlin it’s worth it. Battery backup keeps the gate opening during a power interruption, and desert electrical loads and summer heat make outages more likely than in milder climates. Installed cost runs $210 – $410. A battery backup also protects the operator from brownout surges. Call (866) 983-9213 for a written estimate on your gate.
It means a measured, scheduled job, not a same-day fix. Adding automation to a Summerlin gate with no existing power run involves planning the conduit and power path to the operator location, installing the safety edges, and matching the operator to the panel. We measure on-site, write the price, and schedule the work. Call (866) 983-9213 for a free measure and written quote.
Contact Vance Gate Repair Winchester today at (866) 983-9213 for a free estimate on gate motor and opener work in Summerlin. We’ll give you a written price before any work starts, a photo record when we leave, and a live person answers the phone 24 hours a day.
Written by the team at Vance Gate Repair Winchester.