Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Sunrise Manor, NV
Sunrise Manor sits on the unincorporated east side of the Las Vegas Valley, where the housing is older, the lots are wide, and most front yards are fenced in block and iron rather than managed by an HOA. That shapes the work we do here. A gate call in Sunrise Manor is rarely a builder-installed system under warranty; it’s a hand-built wrought-iron driveway gate on a cinderblock pier, often paired with a swing operator someone retrofitted years ago. We repair those gates and get them moving again, and the price is written down and handed to you before a single tool comes out of the truck. When something’s stuck, dragging, or dead, call (866) 983-9213 and a live person answers at any hour.
Why Sunrise Manor Homeowners Choose Vance Gate Repair Winchester
The reason people in Sunrise Manor call us back is documentation. Every visit ends with a photo record of what we found, what we adjusted, and what we replaced, plus the part numbers and limit-switch readings written down in the job file. That habit came out of commercial access-control work, and it carries over to every residential driveway gate we touch. If a gate fails again, the next technician isn’t starting from zero.
We work on nine major automation brands instead of pushing one, so if your property already runs a DoorKing swing operator or a Ghost Controls arm, we service what’s there rather than steering you toward a new system. Our technicians have up to 12 years of experience, and they arrive background-checked with their name and photo sent ahead. Under the 365-Day Done Right Promise, if a repair isn’t right within a full year, we make it right at no additional charge. Around Nellis Meadows and the blocks off East Charleston, that’s the kind of follow-through people actually ask about.
We also review any written estimate from another company at no cost. Bring the paperwork and we’ll tell you honestly whether the scope matches the problem.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Sunrise Manor

Gate Repair in Sunrise Manor
Sagging hinges anchored in cinderblock, rusted iron frames, gates pulled out of plumb by monsoon gusts: these are the everyday repairs on Sunrise Manor driveways. We diagnose the cause, quote a flat price in writing, and document the fix with photos.
Learn more about our Gate Repair in Sunrise Manor.

Gate Installation in Sunrise Manor
New driveway gates, pedestrian gates, and RV side-yard gates built for desert lots and block-wall fences. Installation is measured and scheduled, and you get a written scope and price before anything is ordered.
Learn more about our Gate Installation in Sunrise Manor.

Gate Motor & Opener in Sunrise Manor
Older swing operators that predate modern safety-conformance units are common in 89110, and intense heat degrades control boards and plastic components fast. We service the motor on the property, whether it’s an Elite arm or a Mighty Mule unit.
Learn more about our Gate Motor & Opener in Sunrise Manor.

Gate Access Control in Sunrise Manor
Keypads, remotes, intercoms, and entry systems for homes with multiple vehicles and side-yard access. We wire and program the system, then leave you a written record of the settings.
Learn more about our Gate Access Control in Sunrise Manor.
Gate Parts & Welding in Sunrise Manor
Custom ironwork, hinge replacement, track repair, and welding for hand-built and vintage gates that don’t fit off-the-shelf parts. We fabricate to the gate you have.
Learn more about our Gate Parts & Welding in Sunrise Manor.
Before
AfterNeighborhoods We Serve in Sunrise Manor
We handle gate repair across the Sunrise Manor area and the 89110 ZIP, from the blocks near Nellis Meadows and the East Charleston corridor to the wide-lot streets toward the valley’s eastern edge. If your property is on a cinderblock-pier fence in this unincorporated stretch, the work is familiar territory. Response across the area is typically the same day for repair calls, and emergency gate failures get dispatched without waiting on a callback queue.
- Nellis Meadows
- East Charleston corridor
- Bonanza and Eastern blocks
- Hollywood and Desert Inn stretches
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor’s Climate & Housing Affect Gate Repair

The desert does specific things to gates here. Relentless sun cooks control boards and plastic components on older swing operators, and seasonal dust and monsoon windstorms pack sand and grit into tracks, hinges, and rollers. More than once, a violent gust has bent or pulled a lightweight iron gate out of plumb entirely. Much of the housing in 89110 runs from late-1970s to 1990s tract homes on generous desert lots, many with block-wall perimeter fences and wrought-iron pedestrian and driveway gates. That means repair calls here skew toward rusted iron frames, sagging hinges anchored in cinderblock piers, and early automatic gates that predate modern safety-conformance units. Because lots are HOA-free, we regularly find operators tacked onto hand-built block-and-iron fences without proper post reinforcement. Before any opener can work reliably, those crumbling piers often need shoring up and the sun-split mortar repointed.
Because this is a working-class unincorporated area rather than a master-planned community to the west, gate work here is mostly rehab and retrofit, not warranty service on builder systems.
Pricing for Gate Repair in Sunrise Manor
Here’s what gate work typically runs in Sunrise Manor, quoted as a flat price in writing before any work begins:
- Hinge replacement or realignment: $150-$350 per gate
- Swing or slide operator repair (board, arm, or limit switch): $220-$600
- Operator replacement, standard swing arm: $650-$1,400 installed
- Gate welding and iron repair: $180-$500
- Access control keypad or remote programming: $120-$300
- New driveway gate installation: $1,800-$5,500 (measured and scheduled)
The number we write is the number you pay. If the scope changes once we open the operator, we stop and tell you before doing anything further.
Service Area – Cities Near Sunrise Manor

We also handle gate work in the surrounding communities, including Whitney, Winchester, Las Vegas, and North Las Vegas. Wherever your property sits in the eastern valley, the same written-price, documented-visit standard applies. Start at our home page to see the full range of services.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor

Most gate repairs in Sunrise Manor run $150-$600, depending on whether it’s a hinge or alignment job or a swing operator repair. Welding and ironwork sit in the $180-$500 range. You get a flat written price before any work starts, so there’s no surprise invoice at the end. Call (866) 983-9213 for an exact quote; estimates are free.
Yes, repair calls in Sunrise Manor are typically dispatched the same day, and a live person answers at any hour. Tell us the brand and model if you know it, or describe what the gate is doing, and we can usually narrow it down on the call. Call (866) 983-9213 to get a technician scheduled.
That’s most of what we see in 89110. Hand-built block-and-iron gates with retrofitted operators are common in Sunrise Manor, and those repairs usually involve shoring up the pier before the operator can work reliably. We fabricate parts to fit the gate you have rather than telling you to replace it. Call (866) 983-9213 to set up a visit.
We service nine major automation brands, including DoorKing, Ghost Controls, Elite, and Mighty Mule, so we can work on whatever motor is already on your property. We don’t push a replacement when a repair will do. Call (866) 983-9213 and tell us what’s on the gate.
A full installation covers measuring the opening, building or fitting the gate, mounting the operator, wiring the power run, and setting the safety edges and photo-eye. Installation is scheduled after a free measure and a written price, not promised same-day. Call (866) 983-9213 to start the process.
Written by the team at Vance Gate Repair Winchester.
Contact us today at (866) 983-9213 for a free estimate on gate repair in Sunrise Manor. The price is in writing before we start, the visit is documented with photos, and the 365-Day Done Right Promise backs every completed repair.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Sunrise Manor Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.